Tech & Tools

The Tin Man’s Garage to Present Live Metal Shaping Demo at 2012 HRR Trade Show

Posted By Ashley Smissen , January 18, 2012

The live demos will be held on Friday and Saturday.

The Tin Man’s Garage will be hosting a live metal shaping demonstration right on the show floor of the 2012 Hotrod & Restoration Trade Show. New for 2012, the demo will be held in shop’s booth and will show attendees how metal-shaping techniques such as buck building, pattern making and pullman can be used on a variety of materials.

Editor’s Corner: Tech Tips for Converting to Rack & Pinion Steering

Posted By Mike Mavrigian , January 4, 2012 1 comment

In this article, HRR Tech Editor Mike Mavrigian discusses the benefits of converting a vintage steering system to a rack-and-pinion system. He also provides solutions to the most common problems that builders face when trying to convert.

Ron Covell to Present New Metal Shaping Seminars in February

Posted By Ashley Smissen , January 4, 2012

Trick Tools has announced that metal shaping expert Ron Covell will host two metal shaping seminars at its Pella, Iowa, facility in late February. The two “Extreme Metal Shaping” seminars will be held on Saturday, February 25 and Sunday, February 26.

10 Things You Should Know About Threaded Fasteners

Posted By Ashley Smissen , December 13, 2011 2 comments

Even if you’re an expert, it’s always a good idea to review the basics. Here, the essentials of selecting and installing threaded fasteners are covered by HRRM Tech Editor Mike Mavrigian.

Kugel Komponents Introduces New Chassis-Moving Tool

Posted By Ashley Smissen , October 27, 2011

Wheel Arounds from Kugel Komponents were designed to make the act of moving a chassis around a shop easier. They’re made of injection-molded polyurethane and can support up to 1,500 pounds of static load.

K-Tool Introduces New Electric Polish & Sand Tool

Posted By Ashley Smissen , October 24, 2011

K-Tool International (KTI) has announced the release of its new 7-inch polisher/sander, which features variable speed control, a soft start feature and several other elements designed to increase technician comfort.

HTP America Offers New AC/DC Inverter Welder

Posted By Ashley Smissen , October 14, 2011

HTP America’s new Invertig 221 AC/DC Inverter Welder allows for independent AC amperage adjustment, and has a high-speed DC pulse that allows for work on mild steel, 4130, stainless steel, inconel and titanium.

Del City Introduces New LED Work Lights

Posted By Ashley Smissen , September 16, 2011 1 comment

Del City has introduced its new LED Rechargeable Work Light (left) and LED Pocket Light Stick.

Del City now offers two new kinds of LED work lights that help to illuminate dark work areas: the LED Pocket Light Stick and the LED Rechargeable Work Light.

Expert Tips for Properly Wiring a Car Audio System

Posted By Rob Derry (AAMP of America) , August 9, 2011 1 comment

Knowing the right way to wire a car audio system is essential for delivering a quality system to your customer. In this article, Rob Derry of AAMP of America discusses the proper way to phase speakers, and the correct power and ground procedures to allow your vehicle to achieve the maximum voltage output to your amplifier.

What to Pay Attention to When Doing Modern Engine Swaps

Posted By Ashley Smissen , July 22, 2011 1 comment

The team at Modern Muscle, a hot rod shop located in Oswego, Illinois, compiled this helpful list of the top 10 things people commonly forget or underestimate when doing a late-model engine swap, including wiring, steering and torque converters.